My Blinkie

FanRissa ByFreek

I Design 4

Zen Cart:: the art of e-commerce


SYM Blinkie


Follow Me

Chatbox

CU License

Picture
January 31, 2012

PTU Olde Irish Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/31/12

You must have basic knowledge of PSP

Scrap Kit by Stargazer Musings called The Olde Irish. You can purchase that here

I used the artwork of Ismael Rac. You must have a license to use his work. You can get a license and purchase his work here

Let's get started!

Open a new canvas 600x600

Open PaperFrame_1
Copy>Paste>Paste as new layer
Resize as needed
Place in the center of your canvas

Open Paper_25
Copy>Paste>Paste as new layer
Resize as needed
Delete excess around edges of your frame layer

Add your tube

Open Beer
Copy>Paste>paste as new layer
Resize as needed
Place in the lower left corner of your frame layer

Open CelticLute
Copy>Paste>Paste as new layer
Resize as needed
Place near beer layer

Open Paper_3
Open your mask
Layers>New Mask Layer
Choose your mask>Apply
Merge>Merge group
Copy>Paste>Paste as new layer
Resize as needed
make this your bottom layer

Add your name text

Add your copyright

Now you should have something similar to my example

~Thank you for using my tutorial~
January 26, 2012

PTU Vineyard Tutorial


This tutorial is 100% my creation. any resemblance to any other is coincidence and not intentional.
Written: 1/26/12

You must have basic knowledge of PSP

Scrap Kit by Broken Sky Dezine called Vineyard. You can purchase that here

I used the artwork of Keith Garvey. You must have a license to use his work. You can get one and purchase his work here

Let's get started

Open new canvas 600x600

Open Frame06
Copy>Paste>Paste as new layer
Do not resize
Place in the center of your canvas

Open Paper3
Copy>Paste>Paste as new layer
Resize as needed
Place under your frame layer
Delete excess paper around the edges of your frame layer
Add your tube
Resize as needed

Open Wine
copy>paste>Paste as new layer
Resize as needed
Place to the left of your frame layer

Open Paper 5
Layers>Load/Save mask>Load Mask from Disk
Apply your chosen mask
Merge>Merge group
Copy>Paste>Paste as new layer
Resize as needed
Make this your bottom layer

Add your name text

Add your copyright

You should have something similar to my example

~Thank you for using/reading my tutorial~
January 24, 2012

PTU Rage Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/24/12

You must have basic knowledge of PSP

Scrap Kit by Digi Cats & Dogs called Rage. You can purchase it here

I used the artwork of Arthur Crowe. You must have a license to use his work. You can get a license and purchase his tubes here

Supplies needed:
Rage Scrap Kit
Font and Mask of choice
Tube

Let's get started!

Open a new canvas 600x700

Open Frame10
Copy>Paste>Paste as new layer
Resize as needed
Place in the center of your canvas

Open Paper06
Copy>paste>paste as new layer
Resize as needed
Delete excess around each frame edge

Open your tube of choice
Copy>Paste>Paste as new layer
Duplicate twice and place 2 under your frame layer on the left and right
Resize as needed
Delete excess
Set Opacity to around 67

Open Bow2
Copy>Paste>Paste as new layer
Resize as needed
Place to your desire

Open Paper02
Layers>Load/Save Mask>Load mask from disk
Choose your mask
Apply
Merge>Merge group
Copy>Paste>Paste as new layer
Resize as needed
Make this your bottom layer

Open Love Pin
Copy>Paste>Paste as new layer
Resize as needed
Place near the bottom of your frame layer

Open Lightning02
Copy>paste>Paste as new layer
Resize as needed
Place under the right square of your frame layer
Duplicate
Image>Mirror

Open Love Potion
Copy>Paste>paste as new layer
Resize as needed
Place near the right of your Love Pin
Duplicate
Image>Mirror

Open Longstem Rose06
Copy>Paste>Paste as new layer
Resize as needed
Place as desired

Add copyright

Add name text

You should have something similar to my example

~Thank you for reading/using my tutorial~
January 20, 2012

PTU Gangsta Babe Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/20/12

You must have basic knowledge of PSP

Scrap Kit by Rebellious Scraps called Gangsta Babe. You can purchase it here

I used the artwork of Keith Garvey. You must have a license to use his work. You can get a license and purchase his work here

Supplies needed:
Tube of choice
Font: Initial
Scrap Kit: Gangsta Babe
Mask of choice

Let's get started!

Open a new canvas 600x600

Open Frame2
Copy>Paste>paste as new layer
Resize: 80
Place a little off center of your canvas

Open Paper7
Copy>Paste>Paste as new layer
Resize as needed
Place below your frame layer
Delete excess around edges of your frame layer

Open your tube of choice
Copy>Paste>Paste as new layer
Place as desired

Open Banner 2
Copy>Paste>Paste as new layer
Resize as needed
Place new the bottom of your frame layer

Open Brass Knuckles
Copy>Paste>Paste as new layer
Resize as needed
Place near the right edge of your frame layer and under your banner layer

Open bullter holes1
Copy>Paste>Paste as new layer
Resize as needed
Place just above your paper layer

Open cigarettes
Copy>Paste>Paste as new layer
Resize as needed
Place to the left of your canvas under your paper layer
Refer to example

Open dice
Copy>Paste>Paste as new layer
Resize
Move to the left of your canvas and place under your cigarettes layer
Refer to example

Open Ghetto Blaster
Copy>Paste>Paste as new layer
Resize 
Place above your banner layer
Move to just below your banner layer
Refer to example

Open Dollar Bills
Copy>Paste>Paste as new layer
Resize
Place below your Brass Knuckles layer

Open Zippo
Copy>Paste>Paste as new layer
Resize
Place under your Dollar Bills layer 
Move the right of your frame layer
Refer to example

Open paper1
Layers>Load/Save mask>Load Mask from Disk
Choose your mask
Apply
Merge>Merge group
Copy>Paste>Paste as new layer
Resize as needed
Make this your bottom layer

Add your copyright

Add your name text

You should have something similar to my example

~Thank you for readin/using my tutorial~

FTU Tutorial~ Denim & Lace

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/20/12

You must have basic knowledge of PSP

Scrap Kit by Irish Princess Designs called Denim & Lace

I used the artwork of Unholy Vault Designs. You must have a license to use UVD's work. You can get a license and UVD'S work here

Supplies needed:
Font: LMS School Girl Crush
Scrap Kit: Denim & Lace
Mask of choice
Tube of choice

Let's get started!

Open a new canvas 600x600

Open Pocket Frame2
Copy>Paste>Paste as new layer
Resize: 55
Place in the center of your canvas

Open LaceRing
Copy>Paste>Paste as new layer
Do not resize
Place under your Pocket Frame layer
Reposition as necessary

Open Paper5
Copy>Paste>Paste as new layer
Resize to a smaller size
Place under your LaceRing layer
Delete excess paper

Open you tube of choice
Copy>Paste>Paste as new layer
Place as desired or refer to example

Open Balloons
Copy>Paste>Paste as new layer
Size down to your desire
Place in the upper right corner of your Pocket frame layer
Duplicate
Move your duplicate layer to the left of corner of your frame layer and under your tube layer

Open Toast2
Copy>Paste>Paste as new layer
Resize as desired
Place in the bottom right corner of your frame layer
Duplicate
Image>Mirror
Move your duplicate layer back over to your original layer and place as desired
Add a drop shadow to both layers

Open BlueLove
Copy>Paste>Paste as new layer
Resize as needed
Place near your Toast2 layers

Open Paper11
Layers>Load/Save Mask>Load Mask from Disk
Choose your mask
Apply
Merge>Merge group
Copy>Paste>Paste as new layer
Resize as needed
Make this your bottom layer

Add your copyright

Add your name text

Now you should have something similar to my example

~Thank you for using/reading my tutorial~
January 18, 2012

PTU Valentina Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/18/12

You must have basic knowledge of PSP

Scrap kit by Tammy's Scraps called Valentina. You can purchase that here

I used the artwork of Ismael Rac. You must have a license to use his artwork. You can get a license and purchase his work here

Supplies:
Font of  choice
Valentina Scrap Kit
Tube of Choice
Mask of Choice

Let's get started!

Open a new canvas 650x500

Open element68
Copy>Paste>Paste as new layer
Resize: 94
Place in the center of your canvas

Open Paper2
Copy>Paste>Paste as new layer
Delete excess paper around all edges of your frame layer

Open your tube of choice
Copy>Paste>Paste as new layer
Duplicate twice
Place all under your frame layer
Moved each into a single frame and delete excess (resize as needed)
Set Opacity to around 63-65 for your left and right tube layers

Open paper3
Layers>Load/Save mask>Load Mask from Disk
Choose your mask and apply
Merge>Merge group
Copy>Paste>Paste as new layer
Resize as needed
Make this your bottom layer

Open element15
Copy>Paste>Paste as new layer
Resize: 40
Place as desired or refer to example

Add your name text

Add your copyright

You should have something similar to my example

~Thank you for using/reading my tutorial~
January 13, 2012

PTU: Dark Cravings 2 Tutorial

This tutorial is 100%  my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/13/12

Scrap kit by Digicats (&dogs) called Dark Cravings 2. You can find her blog here

I used the artwork of Keith Garvey. You must have a license to use his work. You can get a license and purchase his work here

Supplies needed:
Scrap Kit of choice
Tube of choice
Mask of choice
Font of choice

Let's get started!

Open a new canvas 600x600

Open Frame08
Copy>Paste>Paste as new layer
Do not resize
Move to the upper area of your canvas

Open Frame10
Copy>Paste>Paste as new layer
Resize: 65
Move to the bottom of your Frame08 layer
Leave it overlapping

Open Paper 20
Copy>Paste>Paste as new layer
Resize as needed
Place under your frame08 layer
Delete excess paper around edges

Open Paper02
Copy>Paste>Paste as new layer
Resize as needed
Place under Frame10
Delete excess around edges

Open your tube of choice 
Copy>Paste>Paste as new layer
Place in the center of your Frame08 layer
Resize as needed
Duplicate
Place over your paper layer for Frame10
Set Opacity to around 55

Open Paper07
Layers>Load/save mask>Load mask from disk
Choose your mask and apply
Merge>merge group
Copy>Paste>Paste as new layer
Make this your bottom layer
Resize as needed

Open Barbed Wire01
Copy>Paste>Paste as new layer
Resize as needed and place near the bottom of your Frame10 layer

Open Crossed Whips
Copy>Paste>Paste as new layer
Down size to your desire
Move to the right of your canvas under your paper layer for your Frame 10 layer
Duplicate
Image>Mirror
Refer to example

Open Diamond Cuffs
copy>paste>paste as new layer
Resize: 37
Move the the bottom right corner of your frame10 layer
Duplicate
Image>Mirror

Add your copyright

Add your name layer

You should have something similar to my example

~Thank you for reading/using my tutorial~


January 10, 2012

PTU FairyTales Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/10/12

You must have basic knowledge of PSP

I used the artwork of Tony Tzanoukakis. You must have a license to use his work. You can request a license and purchase his work here

Scrap Kit by Chi Chi Designz called FairyTales. You can purchase it here

Supplies needed:
FairyTales Scrap Kit or one of choice
Font of choice
Tube of choice
Mask of choice

Let's get started!

Open a new canvas 600x600

Open CoralWindow
Copy>Paste>Paste as new layer
Resize as needed

Open Paper2
copy>paste>paste as new layer
Resize to fit behind your coral window
Delete any excess paper around edges

Open your tube of choice
Copy>Paste>Paste as new layer
Place in the center of your coral window

Open Paper13
Layers>Load/save Mask>Load Mask from disk
Choose your mask> Apply
Merge>merge group
copy>Paste>Paste as new layer
Make this your bottom layer and resize if needed

Open Lantern
copy>paste>paste as new layer
Resize as needed and place to the right side over your coral window
Refer to example

Open Book
Copy>Paste>Paste as new layer
Resize as needed and move to the bottom left of your coral window

Add your copyright

Add your name text

Now you should have something similar to my example

~Thank you for using/reading my tutorial~


January 8, 2012

PTU: Ju Ju Bone Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/8/12

You must have basic knowledge of PSP

Scrap Kit by Wicked Creationz Scraps called Ju Ju Bone. You can purchase it here

I used the artwork of Ismael Rac. You must have a license to use his work. You can get a license and purchase his work here

Supplies needed:
Ju Ju bone Scrapkit (or one of choice)
Tube of choice
Guevara Font
Mask of choice(I used one by Vix)

Let's get started!

Open new canvas 600x600

Open frame 1
Copy>Paste>Paste as new layer
Resize: 70

Open Paper 1
Copy>Paste>Paste as new layer
Resize as needed and delete excess paper around your frame layer

Open your tube of choice
copy>Paste>Paste as new layer
Place as desired

Open Paper 8
Layers>Load/save Mask>Load Mask from disk
Choose your mask and apply
Merge>Merge group
copy>Paste>Paste as new layer
Make this your bottom layer
Resize as needed

Open Black Rose
copy>Paste>Paste as new layer
Resize: 50%
Move to the bottom right area of your frame layer

Open Chalice
Copy>Paste>Paste as new layer
Resize: 60%
Move the right of your frame layer

Open JuJuBone in a bottle
Copy>Paste>Paste as new layer
Resize: 40%
Move to the right side of your frame layer

Add your name text

Add your copyright

Now you should have something similar to my example

~Thank you for using/reading my tutorial~


January 6, 2012

PTU Mad As A Hatter Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/6/12

You must have basic knowledge of PSP

Scrap Kit by Shani of Wicked Princess Scraps. You can purchase it here

I used the Artwork of Elias Chatzoudis. You must have a license to use his work. You can get that and purchase his tubes here

Supplies needed:
Tube of Choice
Mad as a hatter scrapkit
Or Scrap Kit of choice
Mask of Choice
Font of choice

Let's get started!


Open a new canvas 600x600

Open Scallopedcircle frame
Copy>paste>Paste as new layer
Resize: 60
Move to the lower right of your canvas
Duplicate
Move your bottom frame to over lap above your top frame

Open Paper8
Open your materials properties window
Choose your pattern tab
Make Paper8 your pattern
Apply
Choose your top frame layer
Choose your wand tool>Select the inner area of your frame layer
Choose your flood fill tool
Flood fill selected area
Selections>Select none
Repeat for your bottom frame layer
Choose your tube>Open
copy>Paste>Paste as new layer
Resize as needed
Place as desired

Open Cards4
Copy>Paste>paste as new layer
Resize as needed
Move behind your bottom frame layer
Refer to example

Open Carnation
Copy>Paste>Paste as new layer
Do not resize
Place in the center under both frames

Open Hat
Copy>Paste>Paste as new layer
Resize as needed
Place above your frame layer near the bottom area

Choose you a paper or do a new canvas flood fill like i did
Layers>Load/save mask>Load mask from disk
choose your mask and apply
Merge>merge group
Copy>Paste>Paste as new layer
Resize as needed
Make this your bottom layer

Open Wordart
Copy>Paste>Paste as new layer
Place in the center above your frame layers
Resize as needed
Duplicate
Move your duplicate layer under your card layer
Choose your original wordart layer
Choose your eraser tool
erase wordart overlapping your card layer

Add your copyright

Add your name text

Add your Mad As A Hatter text (if desired)

You should have something similar to my example

~Thank you for reading/using my tutorial~
January 5, 2012

PTU Supernatural Tutorial

This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/5/12

You must have basic knowledge of PSP

Scrapkit by Mellow's Graphics. You can purchase it here

I used the artwork of Arthur Crowe. You must have a license to use his work. You can get a license and purchase his work here

Supplies needed:
Tube of choice
Scrapkit of choice
Mask of choice

Let's get started!

Open new canvas 600x600

Open Frame1
Copy>Paste>Paste as new layer
Do not resize

Open Paper1
Copy>Paste>Paste as new layer
Resize to fit under your frame layer
Open tube of choice and place as desired

Open Paper10
Layers>Load/save Mask>Load mask from disk
Choose your mask
Apply
Merge>Merge group
Copy>Paste>Paste as new layer
Make this your bottom layer
Resize as needed

Open Impala2
Copy>Paste>paste as new layer
Resize: 60
Move to the bottom right corner of your frame layer

Open HolyWater2
Copy>Paste>paste as new layer
Resize as needed
Place as desired

Open Qujiaboard2
Copy>Paste>Paste as new layer
Resize as needed
Place as desired

Add copyright

Add your name text

You should have something similar to my example

~Thank you for reading/using my tutorial~

PTU: Blue Valentine Tutorial


This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/5/12

I used the artwork of Zlata_M. You must have a license to use her work. You can get a license and purchase her work here

Scrap Kit by Wacky Winnie Designz called Blue Valentine. You can purchase that here

Supplies needed:
Tube of Choice
Scrap Kit of Choice
Eye Candy 4000>Swirl

Let's get started!

Open a new canvas 600x250

Open Paper17
Open your materials properties window
Choose your pattern tab
Make Paper17 your patter and click ok
Choose your flood fill tool
Flood fill your canvas with Paper17 pattern
Selections>Select all
Selections>Modify>Select Selection Borders
Size: 7
Select>Float

Open your materials properties tab
Select your gradient tab
Edit
Choose 2 colors from your Paper17 pattern
Apply
Flood fill your border with your gradient
Effects>Eye Candy 4000>Swirl
Use these settings:

Selections>Defloat
Selections>Select None

Choose your tube
Copy>Paste>Paste as new layer
Place as desired
Duplicate
Move to the right
Delete excess after resizing if needed
Duplicate again
Image>Mirror
Set Opacity to around 67 for both duplicates

Open Flower5
Copy>Paste>Paste as new layer
Move to the left bottom corner
Place as desired
Delete Excess overlapping your border
Duplicate
Image>Mirror

Add your name text

Add other text if desired

Add your copyright

You should have something similar to my example

Now for the avatar
Open new canvas 150x200
Flood fill with Paper17 pattern
Add border with previous settings
Add your tube>Delete excess
Add your elements

Add copyright

Add your name text or initial

You should have something similar to my example

~Thank you for reading/using my tutorial~

January 3, 2012

PTU Betrayed Tutorial



This tutorial is 100% my creation, any resemblance to any other is coincidence and not intentional.
Written: 1/3/12

You must have basic knowledge of PSP

Scrap Kit by Sleek N Sassy Designz. You can purchase it here

I used the artwork of Ismael Rac. You need a license to use his work. You can get it and purchase his tubes here

Supplies needed:
Scrapkit of choice
Tube of choice
Eye Candy 4000>Glass
Eye Candy 4000>Swirl

Let's get started!

Open new canvas 600x250

Open Paper9
Open your materials properties window
Choose your pattern tab
Make Paper9 your patter and apply
Choose your Flood fill tool
Flood fill canvas with Paper9 pattern
Effects>Plugins>Eye Candy 4000>Swirl
Use these settings or play around with it until you get what you want

Selections>Select all
Selections>Modify>Select Selection Borders
Size: 7
Selections>Float
Effects>Plugins>Eye Candy 4000>Glass
Use these settings:

Selections>Defloat
Selections>Select none

Choose your tube>Open
Copy>Paste>Paste as new layer
Resize as needed
Place in the center of your canvas
Delete excess tube overlapping your border

Open embellishment2
Copy>Paste>Paste as new layer
Resize as needed
Move to the far left of your canvas below your tube layer
Duplicate
Image>Mirror

Open Flower2
Copy>Paste>Paste as new layer
Place under your tube layer
Do not resize
Delete excess overlapping your border

Open Caught
Copy>Paste>Paste as new layer
Resize: 20
Move to the bottom right corner
Position as desired
Delete excess overlapping your border

Repeat for the left corner of your canvas

Add your copyright

Add your name text

Add your "Betrayed" text

You should now have something similar to my example

Now for the avatar
Open new canvas 150x200
Flood fill with Paper9 pattern
Add your Eye Candy 4000 Swirl to the background (same settings)
Add your border (repeat previous steps)"
Add your same Eye Candy 4000 Glass settings for your border
Add your tube
Choose 1 or 2 elements and add those

Add your name text or initial

Add your copyright

You should now have something similar to my example

~Thank you for using/reading my tutorial~

Search

Labels

A Simple Sassy Scrap Creation (8) Ad Services (1) Alehandra Vanhek (3) Alfadesire (1) AmyMarie's Kits (27) Angel Wing Scraps (1) Anna Marine (2) Arthur Crowe (36) Artistic Reality Talent (12) Artistically Inclined Licensing (7) Awards (2) Awareness Kits (6) Bee Hive Studio (5) Bella Caribena (2) Blog trains (21) Bookworm Dezines (12) Broken Sky Dezine (9) Bundles (3) Charity (1) Cluster Frame (65) Collab (7) Collab Templates (4) Creation by Sanie (8) Creationz by Witchysheart (2) Creative Design Outlet (1) CT (547) CT CALL (4) CU (78) Dance In The Rain (2) Designer Scraps (9) Di Hailm (11) Ditzy Designs (6) Exclusives (46) Extras (8) Freebies (194) Freya Langford Sidebottom (2) FTU Kits (37) FTU tutorial (13) Hania's Design (2) Heartfelt Perfections (1) Indie Zine (10) Inzpired Creationz (5) Inzpired Creationz Store (16) Irish Bitch Designs (44) Irish Princess Designs (53) Ismael Rac (11) Jose Cano (7) Keith Garvey (1) KIT (1) Kizzed by Kelz (18) Kristy's Scraps (2) Lady Mishka (9) Laguna (1) Lollipops n Gumdrops (44) Masks (9) Matching Kits (1) Michelle's Myths (1) Myka Jelina (1) Mystical Scraps (13) Ninaste (2) Nocturne (2) Overlays (2) Paper Pack (4) PicsforDesign (17) PS Tutorial (1) PTU Collab (1) PTU CU (77) PTU FB Timeline Tutorials (1) PTU Kits (149) PTU PU (2) PTU tutorial (409) Quick Pages (15) Rabid Designz (3) Roman Zaric (3) Sale (8) Scrap Candy (130) Scrappin Krazy Designs (7) Scrapping Your Memories (6) Scraps and Company (6) Scraps from the Heart (6) Scriptz R Us (17) Selisan Al-Gaib (1) Showoffs (6) Smiley Creations (14) Snaggables (4) Snags (53) Sneak Peek (2) Spazz (1) Stargazer Musings (1) Sweet PinUp (5) Tags (108) Templates (52) The PSP Project (51) The Scrappers Den (3) Thrifty Scraps (6) Tiny Turtle Designs (25) Tiny Turtle Designs Store (8) Tony T (6) TOU (1) Toxic Desirez (3) Tunchy Art (1) Tutorials (424) Verymany (3) Wicked Creationz Scraps (9) Wicked Princess Scraps (64) WordArt (6)

About Me

I CT For



 photo WickedPrincessScraps.gif


Blog Archive

CU4CU License

CSBC CU4CULicense RissasDesigns
SD CU4CU License Rissa's Designs
JCarson-ResellersLicenseMT14005(2)

AC CU4CULicense2

cm swlom-lifetime-scriptinglicense